Norm

NEN-EN 13016-1:2016 Ontw. en

Vloeibare aardolieproducten - Dampdruk - Deel 1: Bepaling van luchtverzadigde dampdruk (ASVP) en berekening van gelijkwaardige droge dampdruk (DVPE)

23,50

Over deze norm

Status Ontwerp
Aantal pagina's 16
Commissie Vloeibare en gasvormige brandstoffen, smeermiddelen en verwante producten
Gepubliceerd op 01-11-2016
Taal Engels
This European Standard specifies a method for the determination of the total pressure, exerted in vacuo, by volatile, low viscosity petroleum products, components, ethanol blends up to 85 %, and feedstocks containing air. A dry vapour pressure equivalent (DVPE) can be calculated from the air containing vapour pressure (ASVP) measurement. The conditions used in the test described in this standard are a vapour-to-liquid ratio of 4:1 and a test temperature of 37,8 °C. The equipment is not wetted with water during the test, and the method described is therefore suitable for testing samples with or without oxygenates; no account is taken of dissolved water in the sample. This method described is suitable for testing air-saturated samples that exert an air-saturated vapour pressure of between 7,0 kPa and 130,0 kPa at 37,8 °C. This document is applicable to fuels containing oxygenated compounds up to the limits stated in the relevant EC Directive 85/536/EEC [4], and for ethanol-fuel blends up to 85 % ethanol.¬†WARNING -The use of this Standard can involve hazardous materials, operations and equipment. This Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of users of this standard to take appropriate measures to ensure the safety and health of personnel prior to application of the standard, and fulfil statutory and regulatory requirements for this purpose.

Details

ICS-code 75.080
75.160.20
87.040
Nederlandse titel Vloeibare aardolieproducten - Dampdruk - Deel 1: Bepaling van luchtverzadigde dampdruk (ASVP) en berekening van gelijkwaardige droge dampdruk (DVPE)
Engelse titel Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE)
Vervangt

Winkelwagen

Subtotaal:

Ga naar winkelwagen