Norm

NEN-EN 13035-4:2003 en

Machines en fabrieken voor de productie, behandeling en bewerking van vlakglas - Veiligheidseisen - Deel 4: Kanteltafels

  • Deze norm is ingetrokken sinds 12-01-2010

49,30

Over deze norm

Status Ingetrokken
Aantal pagina's 18
Commissie Mobiele bouwmachines
Gepubliceerd op 01-08-2003
Taal Engels
This standard contains the requirements for safety for the design and installation of tilting tables, where the flat glass is brought from the horizontal almost to the vertical position or vice versa by lying on or - supported at the lower edge - leaning against a supporting surface. 1.2 This standard deals with all significant hazards, hazardous situations and events relevant to tilting tables for flat glass, when they are used as intended and under the conditions foreseeable by the manufacturer (see clause 4). This standard specifies the appropriate technical measures to eliminate or reduce risks which can arise from these significant hazards. 1.3 This standard is not applicable to tilting tables where all movements are done by human power. 1.4 This standard is not applicable to additional equipment, e.g. for cutting (see prEN 13035-3), loading and unloading (see prEN 13035-5), break-out (see prEN 13035-6), transporting (see EN 619) of flat glass as used as integral parts of the machinery. If there are specific risks that arise in connection with tilting tables, appropriate measures are specified. 1.5 This document is not applicable to tilting tables which are manufactured before the date of publication of this document by CEN.

Details

ICS-code 81.100
Nederlandse titel Machines en fabrieken voor de productie, behandeling en bewerking van vlakglas - Veiligheidseisen - Deel 4: Kanteltafels
Engelse titel Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4: Tilting tables
Vervangt
Vervangen door
Normatieve verwijzingen
  • 98/79/EG, In vitro diagnostica

Winkelwagen

Subtotaal:

Ga naar winkelwagen