Norm

NEN-EN 13036-6:2006 Ontw. en

Oppervlak-eigenschappen van weg- en vliegveldverhardingen - Beproevingsmethoden - Deel 6: Meting van dwars- en langsprofielen in de golflengetrajecten voor vlakheid en megastructuur

  • Deze norm is ingetrokken sinds 27-03-2008

23,50

Over deze norm

Status Ingetrokken
Aantal pagina's 14
Commissie Wegenbouwmaterialen
Gepubliceerd op 01-02-2006
Taal Engels
This document establishes the minimum requirements and criteria for classification and measurement procedures with profiling devices, designed for the measurement of transverse and/or longitudinal profiles in the unevenness and megatexture wavelength ranges. Also recommendations for verification and calibration are included. Profiling devices are equipment for measuring evenness of pavements in the longitudinal and/or in the transverse direction of the road or runway. Highway agencies, equipment manufacturers, and other organizations can use this standard to define the measuring capabilities of survey equipment that collects the data necessary to characterize surface conditions. Evenness measurements can be performed by means of static or dynamic devices. A dynamic measurement is a measurement executed out of a device running in the normal traffic flow at the accepted minimum speed or at higher speed (high speed). The standard includes high-speed, low-speed, and stationary equipment.

Details

ICS-code 17.040.20
93.080.10
93.120
Nederlandse titel Oppervlak-eigenschappen van weg- en vliegveldverhardingen - Beproevingsmethoden - Deel 6: Meting van dwars- en langsprofielen in de golflengetrajecten voor vlakheid en megastructuur
Engelse titel Road and airfield surface characteristics - Test methods - Part 6: Measurement of transverse and longitudinal profiles in the evenness and megatexture wavelength ranges
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen