Norm

NEN-EN 13231-3:2000 Ontw. en

Railverkeer - Bovenbouw - Aanvaarding van werk - Deel 3: Aanvaarding van slijp-, frees- en schaafwerk aan spoorstaven in het spoor

  • Deze norm is ingetrokken sinds 27-10-2003

36,24 43,85 Incl BTW

Over deze norm

Status Ingetrokken
Aantal pagina's 45
Commissie Spoorwegen
Gepubliceerd op 01-11-2000
Taal Engels
This part of this European Standard lays down the technical requirements and the measurements to be made for the acceptance of work to re-profile both longitudinally and transversely the heads of railway rails, including the parts of switches and crossings that can be reprofiled. For acceptance purposes, two classes of longitudinal profile and three classes of transverse profile tolerance are defined. It also informs about procedures to verify reference instruments to be used for these measurements and informs about a method to approve non-reference instruments to be used for measurements. It applies to reprofiled vignole railway rails 40 kg/m and above. A form of acceptance documentation that may be used is given in Annex C.

Details

ICS-code 45.080
Nederlandse titel Railverkeer - Bovenbouw - Aanvaarding van werk - Deel 3: Aanvaarding van slijp-, frees- en schaafwerk aan spoorstaven in het spoor
Engelse titel Railway applications - Track - Acceptance of works - Part 3: Acceptance of Rail Grinding, Milling and Plaining Work in Track
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen