Norm

NEN-EN 13523-22:2003 en

Bandgelakte metalen - Beproevingsmethoden - Deel 22: Kleurverschillen - Visuele vergelijking

  • Deze norm is ingetrokken sinds 08-04-2010

34,50

Over deze norm

Status Ingetrokken
Aantal pagina's 7
Commissie Verfwaren
Gepubliceerd op 01-06-2003
Taal Engels
This Part of EN 13523 describes the procedure for determining the difference in the colour of an organic coating on a metallic substrate by visual comparison against a standard using either diffuse natural daylight or artificial daylight in a standard booth. It may occur that two colour specimens will match in daylight but not under another light source. This phenomenon is known as metamerism (see EN 13523-15). In case a metameric match is to be reported in objective terms, spectrophotometric measurements (using CIE Standard Illuminants D65 and A) should be made, in accordance with EN 13523-15. No statement is made about either the precision or the accuracy of this procedure since the results derived are neither in numerical form nor do they provide a pass/fail evaluation in objective terms. Therefore, this procedure should only be used where the use of colour measuring instruments is not recommendable (evaluation of colour matches, inspection of metallic colours etc.). Although colour measuring instruments should be used where possible, in some cases a visual comparison can be useful (evaluation of colour matches, inspection of metallic colours etc.). The standardization of such visual comparisons, by light sources, illuminating and viewing geometry and specimen size, provides for improved uniformity of results. This practice is essential for critical colour matching and is highly recommended for colour inspections.

Details

ICS-code 17.180.20
25.220.60
Nederlandse titel Bandgelakte metalen - Beproevingsmethoden - Deel 22: Kleurverschillen - Visuele vergelijking
Engelse titel Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison
Vervangt
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen