Norm

NEN-EN 13523-7:2014 en

Bandgelakte metalen - Beproevingsmethoden - Deel 7: Weerstand tegen barstvorming door buiging (T-buigproef)

49,30

Over deze norm

Status Definitief
Aantal pagina's 17
Commissie Verfwaren
Gepubliceerd op 01-06-2014
Taal Engels
NEN-EN 13523-7 specifies the procedure for determining the resistance to cracking of an organic coating on a metallic substrate when bent through 135° to 180°. The degree of adhesion may also be evaluated. Both folding and mandrel methods are considered. The folding method is more often used for practical purposes but where more precise determinations are required, the mandrel method is recommended. The cylindrical bend method may also be used for a pass/fail decision by using an agreed mandrel. The choice of the appropriate test method is limited by the thickness and/or the hardness of the substrate. The feasibility of the test depends on the type and thickness of the substrate. During the procedure, the mandrel should not deform.

Details

ICS-code 25.220.60
Nederlandse titel Bandgelakte metalen - Beproevingsmethoden - Deel 7: Weerstand tegen barstvorming door buiging (T-buigproef)
Engelse titel Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
Vervangt

Winkelwagen

Subtotaal:

Ga naar winkelwagen