Norm

NEN-EN 13803-1:2010 en

Railtoepassingen - Bovenbouw - Ontwerpparameters voor het uitlijnen van het spoor - Spoorwijdte 1435 mm en groter - Deel 1: Doorlopend spoor

98,50

Over deze norm

Status Definitief
Aantal pagina's 70
Commissie Spoorwegen
Gepubliceerd op 01-07-2010
Taal Engels
This European Standard specifies the rules and limits that determine permissible speed for a given track alignment. Alternatively, for a specified permissible speed, it defines limits for track alignment design parameters. More restrictive requirements of the High Speed TSI Infrastructure and the Conventional Rail TSI Infrastructure, as well as other (national, company, etc.) rules will apply. This European Standard applies to main lines with track gauges 1435 mm and wider with permissible speeds between 80 km/h and 300 km/h. Annex C (informative) describes the conversion rules which can be applied for tracks with gauges wider than 1435 mm. Normative Annex D is applied for track gauges wider than 1435 mm. However, the values and conditions stated for this speed range can also be applied to lines where permissible speeds are less than 80 km/h, but in this case, more or less restrictive values may need to be used and should be defined in the contract. This European Standard need not be applicable to certain urban and suburban lines. This European Standard also takes account of vehicles that have been approved for high cant deficiencies. For the operation of tilting trains, specific requirements are defined within this European Standard.

Details

ICS-code 45.080
93.100
Nederlandse titel Railtoepassingen - Bovenbouw - Ontwerpparameters voor het uitlijnen van het spoor - Spoorwijdte 1435 mm en groter - Deel 1: Doorlopend spoor
Engelse titel Railway applications - Track - Track alignment design parameters - Track gauges 1435 mm and wider - Part 1: Plain line
Vervangt
Wordt vervangen door
Normatieve verwijzingen
  • 96/48/EG, Hogesnelheidstreinen

Winkelwagen

Subtotaal:

Ga naar winkelwagen