Norm

NEN-EN 13925-3:2002 Ontw. en

Niet-destructieve beproeving - Röntgendiffractie van polykristallijn en amorf materiaal - Deel 3: Instrumenten

  • Deze norm is ingetrokken sinds 01-05-2005

35,70

Over deze norm

Status Ingetrokken
Aantal pagina's 39
Gepubliceerd op 01-06-2002
Taal Engels
This European standard sets out the characteristics of instruments used for X-ray powder diffraction ("powder" as defined in prEN 13925-1, clause 5) as a basis for their control and hence quality assurance of the measurements made by this technique. Performance testing indicators are given for diffractometer performance testing. Different types and makes of X-ray powder diffractometer vary considerably in their design and intended fields of application. This standard attempts to cover as much of this range as possible by keeping to common principles. To make the standard more readily applicable, the Bragg-Brentano configuration is addressed in most detail because of its wide use. Additional considerations and adaptations may be necessary to cover some types of instruments or configuration and some fields of application. Some of these types of instrument are described in Annex B.

Details

ICS-code 19.100
Nederlandse titel Niet-destructieve beproeving - Röntgendiffractie van polykristallijn en amorf materiaal - Deel 3: Instrumenten
Engelse titel Non destructive testing - X-ray diffraction from polycrystalline and amorphous materials - Part 3: Instruments
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen