Over deze norm
This document deals with the technical requirements to minimise the railway specific significant hazards of portable machines and trolleys used for work on tracks as listed in clause 4 and Annex A which can arise during the commissioning, the operation and the maintenance of portable machines and trolleys when used as intended and under the conditions foreseen by the manufacturer. It does not deal with the general function of the machines (e.g. cutting, drilling, grinding). This document applies to manually propelled portable machines and trolleys designed for work on the track with nominal track gauges of 1 435 mm and 1 668 mm and clearance gauge as defined in Annex B including cutting machines and those designed for working on wooden sleepers. This document does not apply to the additional hazards that may exist due to: - the coupling together of trolleys; - the towing or pushing of trolleys by other vehicles; - the use of trolleys for the transportation of persons; - self propelled rail wheeled machines, trolleys coupled to another towing vehicle. Other special vehicles used on railway tracks are dealt with in other European Standards, see Annex J. For portable machines and trolleys used on railway lines with a different clearance gauge to that defined in Annex B specific requirements concerning the clearance gauge may apply1). This document does not apply to the following: - requirements for quality of the work or performance of the machine; - regulations defined by each infrastructure controller for portable machine and trolley operation which shall be the subject of negotiation between the user and the manufacturer; - portable machines used from railway vehicles. This document does not establish the additional requirements for the following: - operation in severe conditions (e.g. extreme environmental conditions such as: freezing applications, high temperatures, corrosive environment, tropical environment, contaminating environments, strong magnetic fields); - operation subject to special rules as potentially explosive atmospheres; - electromagnetic compatibility, due to e.g. electronic components; - hazards occurring during decommissioning and/or recycling; - hazards due to vibration; - hazards due to wind speed greater than 35 m/s; - hazards due to natural causes e.g. earthquake, lightning, flooding etc.
|Nederlandse titel||Railtoepassingen - Bovenbouw - Veiligheidseisen voor draagbare machines en lorries voor constructie en onderhoud|
|Engelse titel||Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance|
|Vervangen door||Normatieve verwijzingen||