Norm

NEN-EN 14033-3:2017 en

Railtoepassingen - Bovenbouw - Railgebonden constructie- en onderhoudsmachines - Deel 3: Algemene veiligheidseisen

86,00

Over deze norm

Status Definitief
Aantal pagina's 65
Commissie Spoorwegen
Gepubliceerd op 01-06-2017
Taal Engels
NEN-EN 14033-3 specifies the significant hazards, hazardous situations and events common to rail bound machines and arising due to the adaptation for their use on railways. These machines are intended for construction, maintenance and inspection of track, structures, infrastructure and fixed electric traction equipment, when they are used as intended or under conditions of misuse which are reasonably foreseeable by the manufacturer, see Clause 4. This European Standard applies to railbound machines and other vehicles - referred to as machines - working exclusively on the railway (utilizing friction adhesion between the rail and rail wheels) but including machines that in working position are partly supported on the ballast or the formation and used for construction, maintenance and inspection of track, structures, infrastructure and fixed electric traction equipment. This European Standard applies to machines that are intended to operate signalling and control systems. Other similar machines are dealt with in other European Standards, see Annex G. This European Standard specifies the common hazards, in normal circumstances, during running, assembly and installation, commissioning, use (including setting, programming, and process changeover), operation, cleaning, fault finding, maintenance and de-commissioning of the machines. Additional safety measures can be required by exceptional circumstances, such as extreme ambient temperatures highly corrosive or contaminating environment; e.g. due to the presence of chemicals, and potentially explosive atmospheres. Specific measures for exceptional circumstances are not dealt with in this European Standard. The specific measures for exceptional circumstances introduced by a railway infrastructure manager and requirements introduced by the manufacturer and/or machine operator as referred to in the scope are not dealt with in this European Standard. When such additional measures are necessary, they should be agreed between the manufacturer and the machine operator. The manufacturer will be responsible independently of this European Standard, for the provision of risk reduction measures for additional hazards created by any additional or alternative requirements. The common hazards specified include the general hazards presented by the machines, and also the hazards presented by the following specific machine functions, common to two or more machine types: - ballast excavation, ballast cleaning, ballast regulating, ballast consolidating; - tamping; - track renewal; - craning; - maintenance of the components of the infrastructure; during commissioning, use, maintenance and servicing. This European Standard does not deal comprehensively with specific machine functions other than the common functions listed in the previous paragraph, or with all possible hazards presented by complete machines or by the combination of functions. For such specific functions or hazards, the use of specific European Standards is recommended. This European Standard does not deal with: - requirements with regard to the quality of work and the performance of the machine; - machines that utilize the overhead contact line for traction purposes; - specific requirements introduced by a railway infrastructure manager; - additional or alternative requirements introduced by the manufacturer and/or operator.

Details

ICS-code 45.120
93.100
Nederlandse titel Railtoepassingen - Bovenbouw - Railgebonden constructie- en onderhoudsmachines - Deel 3: Algemene veiligheidseisen
Engelse titel Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements
Vervangt
Normatieve verwijzingen
  • 2006/42/EG, Machines

Winkelwagen

Subtotaal:

Ga naar winkelwagen