Norm

NEN-EN 14081-3:2012 en

Houtconstructies - Op sterkte gesorteerd hout met rechthoekige doorsnede - Deel 3: Machinaal sorteren; aanvullende eisen voor productiecontrole in de fabriek

49,30

Over deze norm

Status Definitief
Aantal pagina's 17
Commissie TGB Houtconstructies
Gepubliceerd op 01-01-2012
Taal Engels
This European Standard specifies requirements additional to those given in EN 14081-1 for factory production control of machine graded structural timber with rectangular cross-sections shaped by sawing, planing or other methods, and having deviations from the target sizes corresponding to EN 336. Machine grading is in common use in a number of countries. The countries use two basic systems, referred to as ‘output controlled’ and ‘machine controlled’. Both systems require a visual override inspection to cater for strength-reducing characteristics that are not automatically sensed by the machine. The output-controlled system is suitable for use where the grading machines are situated in sawmills grading limited sizes, species and grades in repeated production runs of around one working shift or more. This enables the system to be controlled by testing timber specimens from the daily output. These tests together with statistical procedures are used to monitor and adjust the machine settings to maintain the required strength properties for each strength class. With this system it is permissible for machine approval requirements to be less demanding and for machines of the same type to have non-identical performance. The machine controlled system was developed in Europe. Because of the large number of sizes, species and grades used it was not possible to carry out quality-control tests on timber specimens drawn from production. The system relies therefore on the machines being strictly assessed and controlled, and on considerable research effort to derive the machines settings, which remain constant for all machines of the same type. The acceptability of grading machines and the derivation of settings rely on statistical procedures and the results will therefore depend on the method used. For this reason, this European Standard gives appropriate statistical procedures. The requirements in this European Standard are based on machines in current use and on future types of machines as far as these can be foreseen. It is recognised that additional clauses or standards may be required if unforeseen developments take place.

Details

ICS-code 79.040
Nederlandse titel Houtconstructies - Op sterkte gesorteerd hout met rechthoekige doorsnede - Deel 3: Machinaal sorteren; aanvullende eisen voor productiecontrole in de fabriek
Engelse titel Timber structures - Strength graded structural timber with rectangular cross section - Part 3: Machine grading; additional requirements for factory production control
Vervangt
Normatieve verwijzingen
  • 89/106/EEG, Bouwproducten

Winkelwagen

Subtotaal:

Ga naar winkelwagen