Over deze norm
This standard applies to self-propelled seated rider operated variable reach trucks intended to handle loads of all kinds using one of the attachments listed in 3.10 - 3.11 - 3.13 - 3.14 - 3.15 - 3.16 - 3.19 - 3.20. It does not cover the lifting of persons by any attachments, in particular by work platforms. Machines with variable length load suspension elements (chains, ropes etc) from which the load may swing freely in all directions are not covered in this standard. It applies to the handling of series 1 freight containers of length ≥ 6 metres with the dimensional and securing characteristics as specified in ISO 668 and ISO 3874. For the purpose of this standard, self-propelled seated rider operated variable reach trucks (hereinafter referred to as “trucks”) are counterbalanced lift trucks with one or more articulated arms, telescopic or not, non-slewing, as defined in 220.127.116.11.2 of ISO 5053:1987 used for stacking loads. The load handling means may be mounted directly on the lifting means or on an auxiliary mast fixed at the end of the lifting means. Lifting means shall be non-slewing or have slewing movement not greater than 5° either side of the longitudinal axis of the truck (see figure 1).