NEN-EN 14679:2003 Ontw. en

Uitvoering van bijzonder geotechnisch werk - Diep mengen

  • Deze norm is ingetrokken sinds 25-04-2005

36,24 43,85 Incl BTW

Over deze norm

Status Ingetrokken
Aantal pagina's 47
Commissie Geotechniek
Gepubliceerd op 01-06-2003
Taal Engels
This document specifies general principles for the execution, testing, supervision and monitoring of deep mixing works carried out by two different methods: dry mixing and wet mixing. Deep mixing considered in this document is limited to methods, which involve: a) mixing by rotating mechanical mixing tools (see Annex A, Figure A.1) where the lateral support provided to the surrounding soil is not removed; b) treatment of the soil to a minimum depth of 3 m; c) different shapes and configurations, consisting of either single columns, panels, grids, blocks, walls or any combination of more than one single column, overlapping or not (see Annex A, Figures A.8 to A.12); d) treatment of natural soil, fill, waste deposits and slurries, etc.; e) other ground improvement methods using similar techniques exist (see A.3.5). Guidance on practical aspects of deep mixing, such as execution procedures and equipment, is given in Annex A. Main applications are exemplified in Annex A, Figure A.14. Methods of testing, specification and assessment of design parameters, which are affected by execution, are presented in Annex B.


ICS-code 93.020
Nederlandse titel Uitvoering van bijzonder geotechnisch werk - Diep mengen
Engelse titel Execution of special geotechnical works - Deep mixing
Vervangen door



Ga naar winkelwagen