Norm

NEN-EN 14728:2003 Ontw. en

Geometrische onvolkomenheden in thermoplastisch lassen - Classificatie

  • Deze norm is ingetrokken sinds 18-05-2005

23,50

Over deze norm

Status Ingetrokken
Aantal pagina's 13
Commissie Kunststoffen
Gepubliceerd op 01-07-2003
Taal Engels
This standard provides a classification and a description of imperfections likely to be encountered in thermoplastic welded joints. This standard applies to the following welding processes : - heated tool welding ; - electrofusion welding ; - hot gas welding ; -extrusion welding. This standard applies to the following group of materials : - PVC-C ; - PVC-U including PVC-NI, PVC-RI, PVC-HI ; - PP including PP-B, PP-H, PP-R ; - PE ; - PVDF ; - ECTFE ; - FEP ; - PFA. This European standard is not concerned with the search for the possible influence of these defects on the behaviour of joints in relation to the different types of stress to which the latter may be subjected or on method for preventing such defects. It cannot therefore be used for the acceptance of welds which is defined in quality level standards (see prEN 00249xxx). Only defects giving rise to discontinuities of materials or changes in shape are taken into consideration in this standard, specifying their type, their shape and their positions, without however always indicating their origin or their causes.

Details

ICS-code 25.160.40
83.080.20
Nederlandse titel Geometrische onvolkomenheden in thermoplastisch lassen - Classificatie
Engelse titel Geometric imperfections in thermoplastic welds - Classifications
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen