Over deze norm
This standard specifies Factory Production Control requirements for use by the producers of bituminous emulsions, cut-back and fluxed binders. The Factory Production Control has the quality aim of providing adequate assurance that the binder conforms with the relevant technical specifications. This Standard is applicable to the control of bituminous binders where the constituents and composition are known, having been derived from a prescriptive specification or from the type approval procedure for demonstration of performance related properties described in the appropriate product standard or from an European Technical Approval. The system in this standard builds mainly upon traditional sampling and testing of constituent materials and finished product. Processes as well as process control systems are continuously being developed which means that new systems for Factory Production Control will be introduced and implemented If a producer is able to demonstrate to the notified body that his process control system is able to secure the fulfilment of the requirements on the finished products in a satisfactory way then alternative frequencies of inspection and testing may be acceptable. The basis of this standard is that of the control of constituents, composition, manufacturing. It does not involve the routine monitoring of the performance properties of the binder. This is dealt with separately in the standard type testing of binders.
|Nederlandse titel||Bitumen en bitumineuze bindmiddelen - Bitumineuze emulsies, productiecontrole door de producent van bitumenemulsies en vloeibitumenproducten|
|Engelse titel||Bitumen and bituminous binders - Bituminous emulsions, fluxed and cut-back bitumen factory production control|
|Vervangen door||Normatieve verwijzingen||