Norm

NEN-EN 14789:2003 Ontw. en

Emissies van stationaire bronnen - Bepaling van de volumeconcentratrie van zuurstof (O2) - Referentiemethode - Paramagnetisme

  • Deze norm is ingetrokken sinds 22-11-2005

29,20

Over deze norm

Status Ingetrokken
Aantal pagina's 28
Commissie Emissiemetingen en algemene aspecten
Gepubliceerd op 01-10-2003
Taal Engels
This European Standard specifies a reference method for sampling, and determining oxygen content in ducts and stacks emitting to atmosphere. It describes the paramagnetic technique, including the sampling system and the gas conditioning system, to determine the O2 concentration in flue gases. This European standard is to apply as a reference method for periodic monitoring and for calibration, adjustment or control of automatic monitoring systems permanently installed on a stack. This reference method has been evaluated during field tests on waste incineration and co-incineration installations and large combustion plants. It has been validated with sampling periods of 30 min in the range of 0-20 %. - Oxygen concentration values are used in order to standardise emission measurements of relevant pollutants under given O2 content and dry gas conditions, according to requirements of the following Council Directives: - Council Directive 2001/80/EC on the limitation of emissions of certain pollutants into the air from large combustion plants - Council Directive 2000/76/EC on waste incineration plants. Reference value for O2 are: - 11 % for incineration - 3 % for combustion of gas or liquid fuels - 6 % for combustion of solids fuels - 15 % for gas turbines

Details

ICS-code 13.040.40
Nederlandse titel Emissies van stationaire bronnen - Bepaling van de volumeconcentratrie van zuurstof (O2) - Referentiemethode - Paramagnetisme
Engelse titel Stationary source emissions - Determination of volume concentration of oxygen (O2) - Reference method - Paramagnetism
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen