Norm

NEN-EN 14869-2:2004 en

Structurele lijmverbindingen - Bepaling van het gedrag bij afschuiving van structurele bindingen - Deel 2: Trekproef met dikke trekstaven

  • Deze norm is ingetrokken sinds 26-05-2011

49,30

Over deze norm

Status Ingetrokken
Aantal pagina's 20
Gepubliceerd op 01-07-2004
Taal Engels
This part of EN 14869 specifies a test method for determining the shear behaviour of an adhesive in a single lap joint bonded assembly when subjected to a tensile force. The test is performed on specimens consisting of thick, rigid adherends, with a short length of overlap, in order to obtain the most uniform distribution of shear stresses possible and to minimize other stress states which initiate failure. This test method may be used to determine: - shear-stress against shear-strain curve to failure of the adhesive; - shear modulus of the adhesive; - other adhesive properties that can be derived from the stress/strain curve such as the maximum shear stress and shear strain; - effect of temperature, environment, test speed, etc., on these properties.

Details

ICS-code 83.180
Nederlandse titel Structurele lijmverbindingen - Bepaling van het gedrag bij afschuiving van structurele bindingen - Deel 2: Trekproef met dikke trekstaven
Engelse titel Structural adhesives - Determination of shear behaviour of structural bonds - Part 2: Thick-adherends shear test
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen