Norm

NEN-EN 14884:2004 Ontw. en

Luchtkwaliteit - Emissies van stationaire bronnen - Bepaling van totaal kwik - Geautomatiseerde meetsystemen

  • Deze norm is ingetrokken sinds 19-01-2006

29,20

Over deze norm

Status Ingetrokken
Aantal pagina's 27
Commissie Emissiemetingen en algemene aspecten
Gepubliceerd op 01-02-2004
Taal Engels
This European Standard specifies conditions and criteria for the choice, installation and calibration of automated measuring systems (AMS) used for the monitoring of total mercury concentrations from 0,001 mg/m 3 to 0,5 mg/m 3 1 ) (standard conditions) in exhaust gases from the incineration of waste. The method may be applicable for exhaust gases from other sources with the following typical composition: total suspended matter from 0 mg/m 3 to 20 mg/m 3 ; CxHy from 0 mg/m 3 to 10 mg/m 3 ; HCl from 0 mg/m 3 to 50 mg/m 3 ; HF from 0 mg/m 3 to 10 mg/m 3 ; SO2 from 0 mg/m 3 to 250 mg/m 3 ; CO from 0 mg/m 3 to 250 mg/m 3 ; NOx from 0 mg/m 3 to 500 mg/m 3 ; CO2 from 0 % (volume fraction) to 15 % (volume fraction) (actual); H2O (g) from 2 % (volume fraction) to 25 % (volume fraction) (actual) ; O2 from 8 % (volume fraction) to 15 % (volume fraction) (dry, actual); temperature from 60 °C to 140 °C. This European Standard is applicable on a site-specific basis by direct correlation with the manual reference method described in EN 13211. This European Standard is primarily developed and validated for emissions from waste incinerators. From a technical point of view, it may be applied to other processes. This standard is derived from the general document on the quality assurance of AMS, prEN 14181, and shall be applied in conjunction with that document.

Details

ICS-code 13.040.40
Nederlandse titel Luchtkwaliteit - Emissies van stationaire bronnen - Bepaling van totaal kwik - Geautomatiseerde meetsystemen
Engelse titel Air quality - Stationary source emissions - Determination of total mercury - Automated measuring systems
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen