NEN-EN 14963:2004 Ontw. en

Dakbedekkingen - Lichtstraat van kunststof met dakopstanden - Classificatie, eisen en beproevingsmethoden

  • Deze norm is ingetrokken sinds 31-10-2006


Over deze norm

Status Ingetrokken
Aantal pagina's 53
Gepubliceerd op 01-06-2004
Taal Engels
This European Standard specifies requirements for continuous rooflights made of plastic materials (e. g. GFUP, PC, PMMA, PVC) with or without bearing profiles to be used with upstands made of e. g. GF-UP, PVC, steel, aluminium, wood, concrete, for laying in roofs which serve the purpose of lighting by means of daylight and of ventilating interior spaces by means of opening devices. This standard applies to continuous rooflights without upstand and to continuous rooflights, where a single manufacturer provides all components of the rooflight with upstand, which are bought in a single purchase. It applies to continuous rooflights when mounted with an inclination in longitudinal direction not more than 10° to the horizontal and not more than 10° in transversal direction (see Figure 1), a) with bearing profiles ¾ symmetrical, angled, curved (see Figure 2) or flat (see Figure 3); ¾ constructed with bearing profiles parallel to the span and with a rectangular ground plan; b) without bearing profiles ¾ symmetrical, angled or curved with an angle not more than 45° (measured to the horizontal at the line of fixation, see Figure 4); ¾ constructed with a span (width) lower than or equal 2,5 m and with a rectangular ground plan. The design of the upstand is not part of this standard. Upstands can be prefabricated or site fabricated. Prefabricated upstands are to be considered as part of the rooflight. Site fabricated upstands are not covered by this standard. This standard does not include calculation with regard to works, design requirements and installation techniques. The possible additional functions of smoke and heat ventilation in case of fire, and/or roof access are outside the scope of this European Standard. Rooflights outside of the scope of this standard are covered by EOTA ETA-Guideline 010 "Self supporting translucent roof kits".


ICS-code 91.060.20
Nederlandse titel Dakbedekkingen - Lichtstraat van kunststof met dakopstanden - Classificatie, eisen en beproevingsmethoden
Engelse titel Roof coverings - Continuous rooflights of plastics with upstands - Classification, requirements and test methods
Vervangen door
Normatieve verwijzingen
  • 305/2011,
  • 89/106/EEG, Bouwproducten



Ga naar winkelwagen