NEN-EN 14963:2006 en

Dakbedekkingen - Lichtstraat van kunststof met of zonder dakopstanden - Classificatie, eisen en beproevingsmethoden

87,29 105,62 Incl BTW

Over deze norm

Status Definitief
Aantal pagina's 56
Gepubliceerd op 01-11-2006
Taal Engels
This European Standard specifies requirements for continuous rooflights made of plastic materials (e.g. GF-UP, PC, PMMA, PVC) with or without bearing profiles to be used with upstands made of e.g. GF-UP, PVC, steel, aluminium, wood or concrete, for laying in roofs, which serve the purpose of lighting by means of daylight and, possibly, of ventilating interior spaces by means of opening devices. This European Standard applies to continuous rooflights without upstand and to continuous rooflights, where a single manufacturer provides all components of the rooflight with upstand, which are bought in a single purchase. Products covered by this European Standard may be supplied as continuous rooflights with and without upstand and rooflights intended to be used with an upstand, for which the upstand is specified, but not supplied. It applies to continuous rooflights when mounted with an inclination in the longitudinal direction not more than 10° to the horizontal and not more than 10° in the transversal direction (see Figure 1): a) with bearing profiles: symmetrical, angled, curved (see Figure 2) or flat (see Figure 3); constructed with bearing profiles parallel to the span and with a rectangular ground plan; b) without bearing profiles: symmetrical, angled or curved with an angle not more than 45° (measured to the horizontal at the line of fixing, see Figure 4); constructed with a span (width) lower than or equal 2,5 m and with a rectangular ground plan. This European Standard applies to continuous rooflights, including barrel vault rooflights, with a rectangular ground plan of plastic glazing laying in roofs having, in addition a minimum distance of b/3 (b = effective span of rooflights, corresponding to the light opening). The upstands may be self-supporting or non self-supporting. The design of the upstand is not part of this European Standard. Upstands can be prefabricated or site fabricated. Prefabricated upstands are to be considered as part of the continuous rooflight. Site fabricated upstands are not covered by this European Standard. This European Standard does not include calculation with regard to works, design requirements and installation techniques. The possible additional functions of smoke and heat ventilation in case of fire, and/or roof access are outside the scope of this European Standard. NOTE 1 Continuous rooflights outside of the scope of this European Standard


ICS-code 91.060.20
Nederlandse titel Dakbedekkingen - Lichtstraat van kunststof met of zonder dakopstanden - Classificatie, eisen en beproevingsmethoden
Engelse titel Roof coverings - Continuous rooflights of plastics with or without upstands - Classification, requirements and test methods



Ga naar winkelwagen