Norm

NEN-EN 15001-1:2004 Ontw. en

Gasvoorzieningsystemen - Gasinstallatieleidingen met bedrijfsdrukken groter dan 0,5 bar voor industriële, zakelijke en niet-huishoudelijke gasinstallaties - Deel 1: Gedetailleerde functionele eisen voor ontwerp, materialen, constructie, inspectie en beproeving

  • Deze norm is ingetrokken sinds 05-02-2009

59,10

Over deze norm

Status Ingetrokken
Aantal pagina's 125
Commissie Industriële gasinstallaties
Gepubliceerd op 01-07-2004
Taal Engels
This standard specifies detailed functional requirements for the design, selection of materials, construction, inspection and testing of industrial gas installations and assemblies with an operating pressure greater than 0,5 bar and of non-industrial gas installations with an operating pressure greater than 5 bar in buildings and areas intended for domestic, commercial, public and mixed uses, starting from the gas supplier's behind the network operator's point of delivery up to the inlet connection to the gas appliance; normally the inlet isolation valve. This standard also covers the inlet connection to the gas appliance comprising of the pipework that does not fall within the scope of the appliance standard. This standard applies to gas installations operating at ambient temperatures between -20°C and 40°C and operating pressures up to and including 60 bar. For operating conditions outside these limitations, reference should be made to EN 13480 for metallic pipework. For industrial gas installations up to and including 0,5 bar and for non-industrial (domestic and commercial) gas installations up to and including 5 bar in buildings and areas intended for domestic, commercial, public and mixed use, EN 1775 applies. For gas installations that do not fall within the scope of EN 1775 or other European standards, this standard applies. In this standard, the term "gas" refers to combustible gases, which are gaseous at 15°C and 1 013 mbar absolute atmospheric pressure. These gases are commonly referred to as manufactured gas, natural gas or Liquidfied Petroleum Gas (LPG). They are also referred to as first, second or third family gases (see table 1 of EN 437:1993). LPG storage vessels (including all ancillaries fitted directly to storage vessels) are excluded. Also excluded are LPG installations and sections of LPG installations operating at vapour pressure. In this standard, all pressures are gauge pressures unless otherwise stated. This standard has been harmonised to address the essential safety requirements of the Pressure Equipment Directive (PED, 97/23/EC) for the joining of gas installation pipework (assemblies) falling within the scope of the PED. However " this Directive does not cover the assembly of pressure equipment on the site and under the responsibility of the user, as in the case of industrial installations." (PED, Preamble, 5th recital, last paragraph). Although in this respect, the standard takes into account the essential safety requirements of the PED, no inference can be drawn from this as to whether or not the installation or parts of the installation falls within the scope of the PED. Reference should be made to the PED and national legislation. For gas installations within the scope of this standard, national legislation and regulations have to be taken into account. Functional requirements for commissioning, operation and maintenance of industrial gas installations and assemblies with an operating pressure greater than 0,5 bar and of gas installations greater than 5 bar in buildings and areas intended for domestic, commercial, public and mixed uses are described in WI 002340027, part 2 of this standard.

Details

ICS-code 91.140.40
Nederlandse titel Gasvoorzieningsystemen - Gasinstallatieleidingen met bedrijfsdrukken groter dan 0,5 bar voor industriële, zakelijke en niet-huishoudelijke gasinstallaties - Deel 1: Gedetailleerde functionele eisen voor ontwerp, materialen, constructie, inspectie en beproeving
Engelse titel Gas Supply Systems - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial, commercial and non-domestic gas installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
Vervangen door
Normatieve verwijzingen
  • 97/23/EG, Drukapparatuur (PED)

Winkelwagen

Subtotaal:

Ga naar winkelwagen