NEN-EN 15027:2004 Ontw. en

Verplaatsbare zaagwand en kabelzaaguitrusting voor werkplaats - Veiligheid

  • Deze norm is ingetrokken sinds 22-11-2007


Over deze norm

Status Ingetrokken
Aantal pagina's 35
Commissie Mobiele bouwmachines
Gepubliceerd op 01-09-2004
Taal Engels
The global description "wall saw and wire saw equipment" contains two differing types of machines for use in the construction industry, and both used to make cuts on walls, ceilings and floors composed of mineral construction materials and/or composite materials. The many different cutting tasks and choice of operating method determine the type of machine to be used for each application. The most important being: - the cutting task to be performed; - the cutting method; - the type of construction work; - the type of material to be cut. The machines may therefore be split into the following two principle classifications: - Wall saws ~ rail guided ~ transportable. - Wire saws ~ transportable. The machines are intended for the use of diamond tools. The types of cutting tools used in conjunction with the machines as described above fall within the design and use parameters supplied by the manufacturer. Process cuttings generated by the cutting action are removed from the cutting joint by a medium such as water directed to the cutting tool. Machines covered by this standard may be powered by: electric motor, IC engine, electro-hydraulic drive and IC engine-hydraulic drive. This European standard deals with all significant hazards, hazardous situations and events relevant to wall saws and wire saws machinery, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see clause 4). This standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards generated by the cutting process work cycle. For special applications, for example, when working in potentially explosive atmospheres, additional safety requirements are necessary which are not covered by this standard. This European standard does not apply for wire saws intended for quarrying and stationary machining of natural stone as covered by prEN 12866. This European standard applies primarily to machines which are manufactured after the date of approval by CEN of this standard.


ICS-code 25.080.60
Nederlandse titel Verplaatsbare zaagwand en kabelzaaguitrusting voor werkplaats - Veiligheid
Engelse titel Transportable wall saw and wire saw equipment for job site - Safety
Vervangen door
Normatieve verwijzingen
  • 98/37/EG, Machines



Ga naar winkelwagen