Norm

NEN-EN 15101-1:2005 Ontw. en

Materialen voor de thermische isolatie van gebouwen - In-situ gevormde los gestorte celluloseproducten - Deel 1: Specificatie voor de producten vóór de installatie

  • Deze norm is ingetrokken sinds 30-05-2007

35,70

Over deze norm

Status Ingetrokken
Aantal pagina's 51
Gepubliceerd op 01-04-2005
Taal Engels
This document specifies requirements for in-situ formed loose-fill cellulose thermal insulation products when installed in internal walls, external walls, floors, galleries, roofs and ceilings. This Part 1 of the document is a specification for the loose-fill cellulose products before installation. Part 1 of this document describes the product characteristics and includes procedures for testing, marking and labelling and the rules for evaluation of conformity. This document does not specify the required level of all properties that should be achieved by a product to demonstrate fitness for purpose in a particular application. The required levels are to be found in regulations or non-conflicting standards. Products covered by this document may also be used in pre-fabricated thermal insulation systems and composite panels; the structural performance of systems incorporating these products is not covered. Products with a declared thermal conductivity at 10 °C greater than 0,060 W/(m·K) or a declared thermal resistance lower than 0,25 m 2 /k/W are not covered by this standard. This document does not cover factory made cellulose products intended to be used for the insulation of buildings or in-situ cellulose products for the insulation of building equipment and industrial installations. This Standard does not specify performance requirements for loadbearing, direct airborne sound and acoustic absorption applications.

Details

ICS-code 91.100.60
Nederlandse titel Materialen voor de thermische isolatie van gebouwen - In-situ gevormde los gestorte celluloseproducten - Deel 1: Specificatie voor de producten vóór de installatie
Engelse titel Thermal insulation products for buildings - In-situ formed loose-fill cellulose products - Part 1: Specification for the products before installation
Vervangen door
Normatieve verwijzingen
  • 89/106/EEG, Bouwproducten

Winkelwagen

Subtotaal:

Ga naar winkelwagen