Norm

NEN-EN 15316-4-3:2017 en

Energieprestatie van gebouwen - Berekeningsmethode voor de systeemenergiebehoefte en het systeemrendement - Deel 4-3: Warmteopwekkers, thermische zonne-energie- en fotovoltaïsche systemen, Module M3-8-3,M8-8-3,M11-8-3

86,00

Over deze norm

Status Definitief
Aantal pagina's 69
Commissie Europese en mondiale normalisatie klimaatbeheersing
Gepubliceerd op 01-06-2017
Taal Engels
NEN-EN 15316-4-3 specifies the: - required inputs; - calculation method; - required and resulting outputs, for heat generation systems, thermal solar systems (for space heating, domestic hot water production and the combination of both) and for photovoltaic systems applied in buildings. Within this standard, 6 methods are specified each method has its own range of applicability. - Method 1, is applicable for solar domestic hot water systems characterized by the EN 12976 series (factory made) or EN 12977-2 (custom built). The main output of the method is the solar heat and back up heat contribution to the requested heat use. - Method 2, is applicable for systems for domestic hot water and / or space heating with components characterized by EN ISO 9806 and EN 12977-3 or EN 12977-4 with a monthly calculation time step. The main output of the method is the solar heat and back up heat contribution to the requested heat use. - Method 3, is applicable for systems for domestic hot water and / or space heating with components characterized by EN ISO 9806 with an hourly calculation time step. The main output of the method is collector loop heat supplied to the heat storage. - Method 4, is applicable for photovoltaic systems with components characterized by standards and with an annual calculation time step. The output of the method is the produced electricity.  - Method 5, is applicable for photovoltaic systems with components characterized by standards and with a monthly calculation time step. The output of the method is the produced electricity. - Method 6, is applicable for photovoltaic systems with components characterized by standards and with a calculation time step. The output of the method is the produced electricity. These three last calculation methods do not take into account: - electrical storage; - PV/thermal photovoltaic systems. Primary energy savings and CO2 savings, which can be achieved by photovoltaic systems compared to other systems, are calculated according to EN ISO 52000-1.

Details

ICS-code 27.160
91.140.10
Nederlandse titel Energieprestatie van gebouwen - Berekeningsmethode voor de systeemenergiebehoefte en het systeemrendement - Deel 4-3: Warmteopwekkers, thermische zonne-energie- en fotovoltaïsche systemen, Module M3-8-3,M8-8-3,M11-8-3
Engelse titel Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-3: Heat generation systems, thermal solar and photovoltaic systems, Module M3-8-3, M8-8-3, M11-8-3
Vervangt
Normatieve verwijzingen
  • ,
  • ,

Winkelwagen

Subtotaal:

Ga naar winkelwagen