NEN-EN 1537:1994 Ontw. en

Uitvoering van bijzonder geotechnisch werk - Grondankers

  • Deze norm is ingetrokken sinds 30-06-2000


Over deze norm

Status Ingetrokken
Aantal pagina's 58
Commissie Geotechniek
Gepubliceerd op 01-07-1994
Taal Engels
This standard is applicable to the design, installation, testing and monitoring of permanent and temporary ground anchors in which an anchor is bonded to the ground by grout. The term "ground" is taken to encompass both soil and rock. The standard is applicable to all types of grout injection anchor transmitting forces through the ground. The planning and design of ground anchors calls for experience and knowledge in this specialised field and although these are covered briefly in ENV 1997-1 Eurocode 7: Geotechnical design;Part 1:General rules, they are treated more fully herein. The installation phase likewise requires skilled and qualified labour and this standard cannot replace the knowledge of specialist personnel and the expertise of experienced contractors. This standard does not address alternative systems of anchoring such as tension piles, screw anchors, mechanical anchors, soil nails or deadman anchors. However, where such anchors are used as ground anchor replacements, it will be important to consider the effects of corrosion of steel components and where possible to apply the corrosion protection concepts outlined in Clause 6. Furthermore, such systems should be subject to the same degree of testing and proving as required for ground anchors in Clause 9.


ICS-code 93.020
Nederlandse titel Uitvoering van bijzonder geotechnisch werk - Grondankers
Engelse titel Execution of special geotechnical work - Ground anchors
Vervangen door



Ga naar winkelwagen