Norm

NEN-EN 15383:2013 en

Kunststofleidingsystemen voor buitenriolering - Glasvezel versterkte thermohardende kunststof buizen (GVK) op basis van polyester hars (UP) - Putten en inspectieputten

  • Deze norm is ingetrokken sinds 28-10-2013

61,30

Over deze norm

Status Ingetrokken
Aantal pagina's 29
Commissie Kunststofleidingsystemen
Gepubliceerd op 01-01-2013
Taal Engels
This European Standard applies to a) inspection chambers, which are intended to be used with inverts which are at a depth not exceeding 2 m; b) manholes, when made from glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP). These products are intended to be used within a drain or sewer system operating without pressure or occasionally at a head of pressure up to 1 bar. It applies to products, and their joints, intended for use in buried installations and to be installed by open-trench techniques. The units have a circular shape with nominal sizes not exceeding the maximum nominal size specified in EN 14364. The intended use of these products is to provide access to, buried drain or sewer systems for the conveyance of waste water at temperatures up to 50 °C, without pressure or occasionally at a head of pressure up to 1 bar, outside buildings and installed in areas subjected to vehicle and/or pedestrian traffic. It specifies definitions, requirements and characteristics of manholes, inspection chambers, joints, materials, test methods and marking.

Details

ICS-code 93.030
Nederlandse titel Kunststofleidingsystemen voor buitenriolering - Glasvezel versterkte thermohardende kunststof buizen (GVK) op basis van polyester hars (UP) - Putten en inspectieputten
Engelse titel Plastics piping systems for drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP) - Manholes and inspection chambers
Vervangt
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen