Norm

NEN-EN 15495:2006 Ontw. en

Niet destructief onderzoek - Akoestische emissie - Onderzoek van metalen drukapparatuur gedurende proeftesten - Zone lokatie van AE bronnen

  • Deze norm is ingetrokken sinds 22-11-2007

23,50

Over deze norm

Status Ingetrokken
Aantal pagina's 13
Gepubliceerd op 01-03-2006
Taal Engels
The purpose of this standard is to describe the methods for conducting acoustic emission (AE) examination of metallic pressure equipment during acceptance pressure testing using a zone location procedure. General principles of Acoustic Emissions are described in EN 13554. The objectives of the AE testing are to provide 100% volumetric testing to define and grade zones of the structure which are acoustically active with burst type AE. The method should be regarded as supplementary to planar location. Planar location provides the source identification and characterisation. Zone location may also be applied in such cases where location of AE sources by planar location procedures according to EN 14584 is not possible. The method identifies the need for further evaluation of follow-up by other NDT in localized zones.

Details

ICS-code 17.160
19.100
77.040.20
Nederlandse titel Niet destructief onderzoek - Akoestische emissie - Onderzoek van metalen drukapparatuur gedurende proeftesten - Zone lokatie van AE bronnen
Engelse titel Non Destructive testing - Acoustic emission - Examination of metallic pressure equipment during proof testing - Zone location of AE sources
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen