Norm

NEN-EN 1563:2010 Ontw. en

Gieterijtechniek - Nodulair gietijzer

  • Deze norm is ingetrokken sinds 04-01-2012

35,70

Over deze norm

Status Ingetrokken
Aantal pagina's 50
Commissie Gieterijtechniek
Gepubliceerd op 01-03-2010
Taal Engels
This European Standard defines the grades and the corresponding requirements for spheroidal graphite cast irons. This European Standard specifies 2 groups of spheroidal graphite cast iron grades by a classification based on mechanical properties measured on machined test pieces prepared from cast samples. The first group deals with ferritic to pearlitic grades. The second group deals with solid-solution strengthened ferritic grades. This European Standard does not cover technical delivery conditions for iron castings. (see EN 1559 Part 3) [1]. This European Standard does not cover all aspects of: ausferritic cast irons which are specified in accordance with EN 1564 [2]; low alloyed ferritic spheroidal cast irons which are specified in accordance with prEN XXX[3]; EN 13835, austenitic cast irons [4]; spheroidal graphite cast iron used for pipes, fittings and their joints which are the subject of EN 545, EN 598 and EN 969; the grades of spheroidal graphite cast iron as specified in EN 545 which may be used for cast iron products such as industrial valves, non industrial manually operated shut-off valves and flanges and their joints, which are the subject of the applicable European product standards.

Details

ICS-code 77.080.10
77.140.80
Nederlandse titel Gieterijtechniek - Nodulair gietijzer
Engelse titel Founding - Spheroidal graphite cast iron
Vervangt
Vervangen door
Normatieve verwijzingen
  • 2014/68/EU,
  • 97/23/EG, Drukapparatuur (PED)

Winkelwagen

Subtotaal:

Ga naar winkelwagen