Norm

NEN-EN 15746-1:2010 en

Railtoepassingen - Bovenbouw - Weg-, railmachines en bijbehorende uitrusting - Deel 1: Technische eisen voor rijden en werkinzet

  • Deze norm is ingetrokken sinds 24-10-2011

98,50

Over deze norm

Status Ingetrokken
Aantal pagina's 78
Commissie Spoorwegen
Gepubliceerd op 01-05-2010
Taal Engels
This European Standard deals with the technical requirements to minimize the specific railway hazards of self propelled road-rail machines - henceforward referred to as machines - and associated equipment, which can arise during the commissioning, the operation and the maintenance of machines when carried out in accordance with the specification given by the manufacturer or his authorised representative. Part 1 of EN 15746 defines requirements for approval of the machine by an authorised body; Part 2 defines requirements for the machine to be declared conformant by the manufacturer, except in the case of machines classified under Annex 4 of the Machinery Directive, which require a conformity check in conjunction with a notified body. Additional requirements can apply for running on infrastructures with narrow gauge or broad gauge lines, lines of tramways, railways utilizing other than adhesion between the rail and rail wheels and underground infrastructures. This European Standard is also applicable for machines and associated equipment that in working configuration are partly supported on the ballast or the formation. Other track construction and maintenance machines used on railway tracks are dealt with in other European Standards, see Annex G.

Details

ICS-code 45.080
93.100
Nederlandse titel Railtoepassingen - Bovenbouw - Weg-, railmachines en bijbehorende uitrusting - Deel 1: Technische eisen voor rijden en werkinzet
Engelse titel Railway applications - Track - Road-rail machines and associated equipment - Part 1: Technical requirements for running and working
Vervangt
Vervangen door
Normatieve verwijzingen
  • 2001/16/EG,

Winkelwagen

Subtotaal:

Ga naar winkelwagen