Norm

NEN-EN 15827:2009 Ontw. en

Railtoepassingen - Draaistellen en onderstellen

  • Deze norm is ingetrokken sinds 06-04-2011

46,90

Over deze norm

Status Ingetrokken
Aantal pagina's 76
Commissie Spoorwegen
Gepubliceerd op 01-10-2009
Taal Engels
This document is applicable to bogies and running gear intended for vehicles that will operate under the Interoperability Directives on designated TEN routes. However, the requirements can be used in other applications. It specifies the requirements to achieve a satisfactory design of bogie or running gear and to validate the design against the relevant performance and safety requirements. Technical requirements are specified directly or by making reference to the relevant European standards and include the nature and content of an auditable record that should be produced of the design and validation processes. The requirements address only the design and validation of bogies and running gear. No requirements are set for other systems components that are attached to the bogies or running gear, except to establish that a satisfactory interface has been provided. A bogie or running gear designed and validated in accordance with this standard will meet the Essential Requirements of a rolling stock TSI. When permitted, it will be eligible for submission for general type approval within the boundaries of its proven operating envelope as defined by this standard. The performance requirements for bogies and running gear fall into two related areas, covering functionality and safety, as required by TSI Essential requirements. Functionality relates to such things as speed, load capacity, ride quality and operating life. Safety covers gauging, structural integrity, dynamic performance, resistance to derailment and maintenance, etc. Taking the requirements as a whole they involve three particular areas of expertise and discipline. Since each of these areas forms a different part of the engineering process they have been addressed individually in the following main clauses of this standard, namely: structural requirements; clause 7; dynamic requirements; clause 8; maintenance requirements; clause 11. These clauses provide details of how the overall objectives are to be achieved in these important specific areas. This document structure is typical of the engineering process for the design, validation and maintenance support of bogies.

Details

ICS-code 45.040
Nederlandse titel Railtoepassingen - Draaistellen en onderstellen
Engelse titel Railway applications - Bogies and running gear
Vervangen door
Normatieve verwijzingen
  • 2008/57/EG, Interoperabiliteit spoorwegsystemen

Winkelwagen

Subtotaal:

Ga naar winkelwagen