NEN-EN 16065:2010 Ontw. en

Verpakking - Vormvaste kunststof verpakkingen - PET sluitingsmonden 30/25 L (16,8)

  • Deze norm is ingetrokken sinds 06-12-2011

16,34 19,77 Incl BTW

Over deze norm

Status Ingetrokken
Aantal pagina's 6
Commissie Verpakking
Gepubliceerd op 01-02-2010
Taal Engels
This document specifies the dimensions and requirements of the 30 mm low screw finish with three thread starts for flat waters and non-carbonated beverages. This finish can be used for aseptic filling and filling with introduction of nitrogen. The dimension (16,8) is the height in millimetres from the top of finish to the bottom of the support ledge. This finish is designed to take a tamper evident plastic closure only. During first opening, the tamper evident band will separate from the closure shell and stay on a one way bottle neck or like bottles in the returnable market, the tamper evident band will tear but will remain connected to the closure shell. This European Standard is based on CE.T.I.E. (International Technical Centre for Bottling and Packaging) data sheet GME 30.22 (2007). Efficient packaging is of great importance for the distribution and the protection of goods. Insufficient or inappropriate packaging can lead to damage or wastage of the contents of the pack.


ICS-code 55.100
Nederlandse titel Verpakking - Vormvaste kunststof verpakkingen - PET sluitingsmonden 30/25 L (16,8)
Engelse titel Packaging - Rigid plastic containers - PET finish 30/25 L (16,8)
Vervangen door



Ga naar winkelwagen