Norm

NEN-EN 1612-2:2000+A1:2008 en

Machines voor kunststoffen en rubber - Reactie-gietmachines - Deel 2: Veiligheidseisen voor reactie-gietinstallaties

49,30

Over deze norm

Status Definitief
Aantal pagina's 22
Commissie Rubber- en kunststofmachines
Gepubliceerd op 01-08-2008
Taal Engels
This standard covers the essential health and safety requirements for the design of reaction moulding plant with the exception of metering and mixing units (for these see part 1). The significant and specific hazards are listed in clause 4 and are dealt with in this standard. This standard does not cover completely the hazards arising from the use of highly flammable additives, for example pentane used as a blowing agent (see 4.3), because these hazards depend to a large extent on the additives and process used. This standard does not cover the hazards due to noise generated by the cutting unit, which is the only significant source of noise at such plant. This standard does not cover the requirements for the design of exhaust systems. This standard does not cover the hazards arising from the assembly of separate units not supplied at the same time by the same manufacturer. This standard applies to reaction moulding plant manufactured after the date of publication of this standard.

Details

ICS-code 83.200
Nederlandse titel Machines voor kunststoffen en rubber - Reactie-gietmachines - Deel 2: Veiligheidseisen voor reactie-gietinstallaties
Engelse titel Plastics and rubber machines - Reaction moulding machines - Part 2: Safety requirements for reaction moulding plant
Vervangt
Normatieve verwijzingen
  • 2006/42/EG, Machines

Winkelwagen

Subtotaal:

Ga naar winkelwagen