Norm

NEN-EN 16143:2013 en

Aardolieproducten - Bepaling van het gehalte van Benzo(a)pyreen (BaP) en geselecteerde polycyclische aromatische koolwaterstoffen (PAK'S) in proces-oli?n - Procedure met dubbele LC reiniging en GC/MS-analyse

49,30

Over deze norm

Status Definitief
Aantal pagina's 22
Commissie Vloeibare en gasvormige brandstoffen, smeermiddelen en verwante producten
Gepubliceerd op 01-02-2013
Taal Engels
This European Standard specifies a procedure for the determination of the content of benzo[a]pyrene (BaP) in extender oils which are commonly used in the rubber industry for the production of tyres or parts of tyres. The method also yields the sum of the eight individual polycyclic aromatic hydrocarbons (PAHs) listed in Table 1. The procedure has been tested and verified for the PAHs listed in Table 1 (those required by the European Commission [1]) and additional PAHs as listed in Table A.2. Analysis of other PAHs is possible in principle, but sufficient quality assurance performed by the user is necessary to secure the analysis. The application range for this method is from approximately 4 mg/kg to approximately 15 mg/kg for the eight individual PAHs and from approximately 0,5 mg/kg to approximately 2 mg/kg for BaP.

Details

ICS-code 75.100
Nederlandse titel Aardolieproducten - Bepaling van het gehalte van Benzo(a)pyreen (BaP) en geselecteerde polycyclische aromatische koolwaterstoffen (PAK'S) in proces-oli?n - Procedure met dubbele LC reiniging en GC/MS-analyse
Engelse titel Petroleum products - Determination of content of Benzo(a)pyrene (BaP) and selected polycyclic aromatic hydrocarbons (PAH) in extender oils - Procedure using double LC cleaning and GC/MS analysis
Vervangt

Winkelwagen

Subtotaal:

Ga naar winkelwagen