Norm

NEN-EN 16185-2:2015 en

Railtoepassingen - Remsystemen van treinstellen- Deel 2: Beproevingsmethoden

86,00

Over deze norm

Status Definitief
Aantal pagina's 62
Commissie Spoorwegen
Gepubliceerd op 01-01-2015
Taal Engels
NEN-EN 16185-2 specifies test methods and acceptance criteria for a brake system for use in self propelling thermal and electric trains, in the following document called EMU/DMU, operating on routes of the European conventional rail system network. This European Standard is applicable to: - all new vehicles designs of self-propelling thermal and electric trains; - all major overhauls of the EMU/DMU if they involve redesigning or extensive alteration to the brake system of the vehicle concerned. This European Standard does not cover: - locomotive hauled trains which are specified by EN 14198; - mass transit rolling stock which is specified by EN 13452 (all parts); - high speed trains being operated at speeds greater than 200 km/h which are specified by EN 15734-1 and tests in EN 15734-2. The functional testing requirements set out in this European Standard assume the vehicles are fitted with brake system architecture as defined in EN 16185-1. The braking performance obtained by applying the tests defined in this European Standard can be used to assess compliance with the required braking performance as defined in EN 16185-1.

Details

ICS-code 45.040
Nederlandse titel Railtoepassingen - Remsystemen van treinstellen- Deel 2: Beproevingsmethoden
Engelse titel Railway applications - Braking systems of multiple unit trains - Part 2: Test methods
Vervangt
Normatieve verwijzingen
  • 2008/57/EG, Interoperabiliteit spoorwegsystemen

Winkelwagen

Subtotaal:

Ga naar winkelwagen