Norm

NEN-EN 16286-2:2013 en

Railtoepassingen - Overgangsinrichting tussen voertuigen - Deel 2: Akoestische metingen

61,30

Over deze norm

Status Definitief
Aantal pagina's 25
Commissie Spoorwegen
Gepubliceerd op 01-04-2013
Taal Engels
This European Standard specifies a measurement method and conditions to obtain reproducible and comparable sound reduction indices of all kinds of rail bound vehicles? gangway systems defined in EN 16286-1. The setup should include all components of the system mounted like this is done between two adjacent car bodies within the train, so that a person will be able to use the gangway system, consisting of e.g: - the bridge system (footplate); - side panels; - flexible components (bellows); - mounting systems; - elements to couple parts in case of separable gangway systems. If separable gangway systems shall be measured, the whole system between two adjacent car bodies should be used. The method is applicable to type testing of gangways. This method is not applicable to: - interior noise measurements in vehicles; - structure borne noise measurements. The type testing procedures specified in this European Standard are of engineering grade (grade 2) in the frequency range from 100 Hz up to 5 kHz; that is the preferred range for noise declaration purposes, as defined in EN ISO 12001. If test conditions are relaxed, the results are no longer of engineering grade.

Details

ICS-code 45.060.20
Nederlandse titel Railtoepassingen - Overgangsinrichting tussen voertuigen - Deel 2: Akoestische metingen
Engelse titel Railway applications - Gangway systems between vehicles - Part 2: Acoustic measurements
Vervangt
Normatieve verwijzingen
  • 2008/57/EG, Interoperabiliteit spoorwegsystemen

Winkelwagen

Subtotaal:

Ga naar winkelwagen