Norm

NEN-EN 16474:2012 Ontw. en

Kunststof- en rubberverwerkende machines - vulcaniseerpersen - veiligheidseisen

  • Deze norm is ingetrokken sinds 01-05-2015

46,90

Over deze norm

Status Ingetrokken
Aantal pagina's 71
Commissie Rubber- en kunststofmachines
Gepubliceerd op 01-08-2012
Taal Engels
This European Standard applies to the tyre curing presses 1 ) as defined in 3.36 having the following configuration. Crossing flow tyre curing presses, with two cavities with: common curing cycle and common safeguarding; or independent curing cycles and common safeguarding; or independent curing cycles and independent safeguarding. Tyre curing presses with one cavity. Tyre curing presses with automatic rear feeding and discharge. The requirements and/or safety measures specified in this European Standard apply to tyre curing presses for passenger vehicle tyres and truck tyres. Only automatic tyre loading into the mould and automatic tyre unloading from the mould are covered by this European Standard. Feeding system and discharge system are not covered by this European Standard. Hazard associated with falling of parts of the container or mould are not covered by this European Standard. Safety requirements relating to the design of ancillary equipment which is not an integral part of the tyre curing press, e.g. conveying equipment are not covered in this European Standard. Safety requirements relating the design of exhaust systems are not covered in this European Standard. This European Standard covers the significant hazards listed in Clause 4.

Details

ICS-code 83.200
Nederlandse titel Kunststof- en rubberverwerkende machines - vulcaniseerpersen - veiligheidseisen
Engelse titel Plastics and rubber machines - Tyre curing presses - Safety requirements
Vervangen door
Normatieve verwijzingen
  • 2006/42/EG, Machines

Winkelwagen

Subtotaal:

Ga naar winkelwagen