Norm

NEN-EN 16798-13:2017 en

Energieprestatie van gebouwen - Ventilatie van gebouwen - Deel 13: Berekening van koelsystemen (Module M4-8) - Opwekking

87,29 105,62 Incl BTW

Over deze norm

Status Definitief
Aantal pagina's 67
Commissie Europese en mondiale normalisatie klimaatbeheersing
Gepubliceerd op 01-06-2017
Taal Engels
NEN-EN 16798-13 covers the calculation of the operational parameters and the energy consumption of cooling generation systems. The cooling generation consists of: - cooling generators like compression and absorption chillers; - other (generic) generator types such as ground or surface water or direct use of ground heat from boreholes; and - different types of heat rejection (dry, wet, hybrid with outdoor air, other sink types). The methods cover: - the possibility of heat recovery of heat to be rejected for the use of heating and/or domestic hot water production, through the use of an interface to the M3-1 standard; and - a multi generator calculation. The document does not cover the cooling emission, distribution and storage systems, which are covered by the Module M4-5, M4-6 and M4-7 standards, respectively. It is directly connected to the general part of the cooling systems, the M4-1 standard. Table 1 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in EN ISO 52000-1:2017.

Details

ICS-code 91.120.10
91.140.30
Nederlandse titel Energieprestatie van gebouwen - Ventilatie van gebouwen - Deel 13: Berekening van koelsystemen (Module M4-8) - Opwekking
Engelse titel Energy performance of buildings - Ventilation for buildings - Part 13: Calculation of cooling systems (Module M4-8) - Generation
Vervangt

Winkelwagen

Subtotaal:

Ga naar winkelwagen