Norm

NEN-EN 1870-8:1996 Ontw. en

Veiligheid van houtbewerkingsmachines - Cirkelzagen - Deel 8: Schulpzagen met aangedreven zaageenheid

  • Deze norm is ingetrokken sinds 01-11-2001

41,00

Over deze norm

Status Ingetrokken
Aantal pagina's 61
Commissie Houtbewerkingsmachines
Gepubliceerd op 01-07-1996
Taal Engels
Sets out the requirements and/or measures to remove the hazard and/or limit the risk on Edging Circular Rip Saws with power driven saw unit, hereinafter referred to as machines, designed to cut solid wood, fibreboard, plywood, and also these materials when covered with plastic laminates or edging. This standard covers all of the hzards relevant to this machine. These hazard are listed in clause 4 of this Standard. This standard applies to machines where the workpiece is stationary, the vertical and horizontal movements of the saw are power driven, and where the machine is provided with workpiece clamping the workpiece may or may not be clamped during cutting. This standard does not apply to hand held woodworking machines or any adaptation permitting their use in a different mode, ie bench mounting. This standard is primarily directed at machines which are manufactured after the date of issue of this standard.

Details

ICS-code 79.120.10
Nederlandse titel Veiligheid van houtbewerkingsmachines - Cirkelzagen - Deel 8: Schulpzagen met aangedreven zaageenheid
Engelse titel Safety of woodworking machines - Circular sawing machines - Part 8: Edging circular rip saws with power driven saw unit
Vervangen door
Normatieve verwijzingen
  • 98/37/EG, Machines

Winkelwagen

Subtotaal:

Ga naar winkelwagen