Norm

NEN-EN 1870-8:2001+A1:2009 en

Veiligheid van houtbewerkingsmachines - Cirkelzagen - Deel 8: Enkelbladige schulpzagen met aangedreven zaageenheid en handmatig laden en/of lossen

  • Deze norm is ingetrokken sinds 03-12-2012

86,00

Over deze norm

Status Ingetrokken
Aantal pagina's 57
Commissie Houtbewerkingsmachines
Gepubliceerd op 01-09-2009
Taal Engels
This document deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading, hereinafter referred to as “machines”, designed to cut solid wood, chipboard, fibreboard and plywood. related to Electro-Magnetic Compatibility (EMC). This European Standard applies to machines where the workpiece is stationary, the vertical and horizontal movements of the saw unit are power driven, and where the machine is provided with workpiece clamping the workpiece may or may not be clamped during cutting. This European Standard does not apply to machines: - where the workpiece is fed to the sawblade during cutting; - designed specifically for cutting veneers; - provided with a device situated behind the line of cut, which moves in a direction parallel to the line of cut, for automatically unloading the workpiece during the return of the saw unit to the rest position. This European Standard is primarily directed at machines which are manufactured after the date of issue of this European Standard.

Details

ICS-code 79.120.10
Nederlandse titel Veiligheid van houtbewerkingsmachines - Cirkelzagen - Deel 8: Enkelbladige schulpzagen met aangedreven zaageenheid en handmatig laden en/of lossen
Engelse titel Safety of woodworking machines - Circular sawing machines - Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading
Vervangt
Wordt vervangen door
Normatieve verwijzingen
  • 98/37/EG, Machines

Winkelwagen

Subtotaal:

Ga naar winkelwagen