Norm

NEN-EN 1911-3:1998 en

Uitworp door stationaire bronnen - Handmatige methode voor de bepaling van HCI - Deel 3: Analyse van absorptievloeistoffen en berekening van resultaten

  • Deze norm is ingetrokken sinds 19-08-2010

49,30

Over deze norm

Status Ingetrokken
Aantal pagina's 16
Gepubliceerd op 01-05-1998
Taal Engels
Specifies methods for analysis of chlorides resulting from hydrogen chloride absorption, according to prEN 1911-2, in waste gases having been sampled and filtered according to prEN 1911-1. All compounds which are volatile at the filtration temperature and produce chloride ions upon dissolution during sampling are measured by this method, which gives therefore the volatile inorganic chlorides content of gases expressed as HCI. In most cases, this corresponds to the hydrogen chloride content; an indicative distinction between hydrogen chloride and volatile chlorides may be achieved, using additional checks. Specifies also validation criteria for the whole HCI measurement method described in EN 1911-1, EN 1911-2 and EN 1911-3, and indicates the performance characteristics of this measurement method.

Details

ICS-code 13.040.40
Nederlandse titel Uitworp door stationaire bronnen - Handmatige methode voor de bepaling van HCI - Deel 3: Analyse van absorptievloeistoffen en berekening van resultaten
Engelse titel Stationary source emissions - Manual method of determination of HCI - Part 3: Absorption solutions analysis and calculation
Vervangt
Vervangen door
Normatieve verwijzingen
  • 94/67/EG, Verbranding gevaarlijke afvalstoffen

Winkelwagen

Subtotaal:

Ga naar winkelwagen