Over deze norm
|Commissie||CV- en warmwatertoestellen|
Applies to heating boilers up to a nominal heat output of 300 kW which are designed for the burning of solid fuels only and are operated according to the instructions of the boiler manufacturer either with negative pressure or with positive pressure in the combustion chamber. The boilers can be used with natural draught or forced draught. The stocking can be manual of automatically. The regulations of this standard apply to heating boilers which are to be tested on an accepted boiler test stand. Heating boilers in accordance with this standard are designed for central heating installations whose heat carrier is water and whose temperature limit is 100°C and which operate at a maximum allowable pressure of 6 bar. For heating boilers with a built-in or attached water heater (storage or continuous flow heater) this standard only applies to those part of the water heater which are necessarily subject to operating conditions of the heating boiler (heating part). The standard does not apply to - central heating, cooking appliances and other heating appliances which are also designed for the direct heating of the place of installation - the design and construction of automatic stoking devices. The purpose of this standard is to specify the necessary terminology for solid fuel heating boilers, the design requirement, the technical heating requirements (taking into account the environmental requirements) and testing, as well as the marking requirements.
|Nederlandse titel||Centrale-verwarmingsketels - Deel 5: Centrale-verwarmingsketels voor vaste brandstoffen, met de hand of automatisch gestookt, met een nominale belasting tot 300 kW - Termen en definities, eisen, beproeving en merken|
|Engelse titel||Heating boilers - Part 5: Heating boilers for solid fuels, hand and automatically fired, with a nominal heat output of up to 300 kW - Terminology, requirements, tesing and marking|