Norm

NEN-EN 3045:1993 en

Lucht- en ruimtevaart - Luchtvaartwentellagers - Eenrijige stalen kogellagers - Middellijnreeksen 0 en 2 - Categorie met gereduceerde speling - Afmetingen en belastingen

52,00

Over deze norm

Status Definitief
Aantal pagina's 6
Commissie Lucht- en ruimtevaart
Gepubliceerd op 01-11-1993
Taal Engels
This standard specifies the characteristics of rigid single row ball bearings in steel of diameter series 0 and 2 designed to withstand only slow rotations and oscillations under load. They are intended for use between fixed and moving parts of the aircraft structure and their control mechanisms, in particular the mounting of more than one bearing on the same shaft axis, which may require reduced clearances and runouts (axial and radial). The airframe rolling bearings in this standard are used from -54 °C to + 150 °C. However, being lubricated with the following greases: very high pressure grease, ester type (code A), operational range from -73 °C to +121 °C or very high pressure grease, synthetic hydrocarbons, general purpose (code B), operational range -54 °C to + 177 °C (see EN 3280), their field of application when lubricated with code A grease is limited to +121 °C.

Details

ICS-code 49.035
Nederlandse titel Lucht- en ruimtevaart - Luchtvaartwentellagers - Eenrijige stalen kogellagers - Middellijnreeksen 0 en 2 - Categorie met gereduceerde speling - Afmetingen en belastingen
Engelse titel Aerospace Series - Bearings, airframe rolling - Rigid single row ball bearings in steel - Diameter series 0 and 2 - Reduced clearance category - Dimensions and loads

Winkelwagen

Subtotaal:

Ga naar winkelwagen