NEN-EN 378-3:2013 Ontw. en

Koelsystemen en warmtepompen - Veiligheids- en milieu-eisen - Deel 3: Installatieplaats en persoonlijke bescherming

  • Deze norm is ingetrokken sinds 07-12-2016


Over deze norm

Status Ingetrokken
Aantal pagina's 23
Commissie Koelinstallaties en warmtepompen
Gepubliceerd op 01-12-2013
Taal Engels
This European Standard specifies the requirements for the safety of persons and property, provides guidance for the protection of the environment and establishes procedures for the operation, maintenance and repair of refrigerating systems and the recovery of refrigerants. The term "refrigerating system" used in this European Standard includes heat pumps. This standard applies: a) to refrigerating systems, stationary or mobile, of all sizes except to road vehicle air conditioners covered by specific product standards such as ISO 13043 and SAE J 639. b) to secondary cooling or heating systems; c) to the location of the refrigerating systems; and d) to parts replaced and components added after adoption of this standard if they are not identical in function and capacity. Systems using refrigerants other than those listed in Annex E of EN 378-1 (or ISO/FDIS 817): 2013 are not covered by this standard. This standard does not apply to goods in storage, with respect to spoilage or contamination. This standard is not applicable to refrigerating systems and heat pumps which were manufactured before the date of its publication as a European Standard except for extensions and modifications to the system which were implemented after publication. This standard is applicable to new refrigerating systems, extensions or modifications of already existing systems, and for existing stationary systems, being transferred to and operated on another site. Deviations are permissible only if equivalent protection is ensured. This standard also applies in the case of the conversion of a system for another refrigerant type, in which case conformity with the relevant clauses of parts 1 to 4 of the standard shall be assessed. This Part 3 of the European Standard is applicable to the installation site (plant space and services). It specifies requirements on the site for safety, which may be needed because of, but not directly connected with, the refrigerating system and its ancillary components.


ICS-code 27.080
Nederlandse titel Koelsystemen en warmtepompen - Veiligheids- en milieu-eisen - Deel 3: Installatieplaats en persoonlijke bescherming
Engelse titel Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site and personal protectionn
Vervangen door



Ga naar winkelwagen