Over deze norm
||Veiligheid van elektronische apparatuur op het gebied van audio/video, informatie- technologie en communicatie- technologie
This European Standard applies to equipment designed and intended to be connected as a terminal to a TELECOMMUNICATION NETWORK and/or a CABLE DISTRIBUTION SYSTEM termination. It does not apply to equipment covered by EN 60950-1 and EN 60065. This European Standard specifies the safety requirements of the interface to the TELECOMMUNICATION NETWORK and/or the CABLE DISTRIBUTION SYSTEM only and it does not specify any other safety requirements. It applies regardless of ownership or responsibility for installation or maintenance of the equipment, and regardless of the source of power. This European Standard, in accordance with the 'principles of safety' given in the introduction of EN 60950-1, covers the requirements and compliance criteria under three headings. - Protection of equipment USERS from hazards in the equipment. The USER is considered to be protected from hazards in the equipment if the equipment complies with a relevant safety standard, for example one of those listed in Annex A, but compliance with those standards is not part of this European Standard. - Protection of SERVICE PERSONNEL working on a TELECOMMUNICATION NETWORK and/or a CABLE DISTRIBUTION SYSTEM and other USERS of a TELECOMMUNICATION NETWORK and/or a CABLE DISTRIBUTION SYSTEM, from hazardous conditions on a TELECOMMUNICATION NETWORK and/or a CABLE DISTRIBUTION SYSTEM resulting from the connection of the equipment. - Protection of equipment USERS from voltages on a TELECOMMUNICATION NETWORK and/or a CABLE DISTRIBUTION SYSTEM. Requirements additional to those specified in this European Standard may be necessary for - equipment intended for operation while exposed, for example, to extremes of temperature, to excessive dust, moisture, or vibration, to flammable gases, to corrosive or explosive atmospheres, - electromedical applications with physical connections to the patient. The requirements for the following items are not covered by this European Standard: - functional reliability of equipment; - communication facilities with remote supply using hazardous voltage; - protection of equipment, TELECOMMUNICATION NETWORKS and/or CABLE DISTRIBUTION SYSTEMS from damage.