NEN-EN 415-6:2003 Ontw. en

Veiligheid van verpakkingsmachines - Deel 6: Palletwikkelmachines

  • Deze norm is ingetrokken sinds 18-01-2007


Over deze norm

Status Ingetrokken
Aantal pagina's 79
Gepubliceerd op 01-07-2003
Taal Engels
This European Standard describes safety requirements for machine design, construction, installation, commissioning, operation, adjustment, maintenance and cleaning of loading unit securing machines. This standard covers the following groups of machines: - Strapping machines, with straps wider than 12 mm for polypropylene (PP), wider than or equal to 9 mm for polyester (PET) and any size for steel - Banding machines - Stretch film enveloping machines - Shrink film wrapping machines - Shrinking systems - Sleeve wrapping machine for load greater than 400 mm in one direction - Pallet tyers - Pallet destrapping machines - Load centralising machines The individual machines are described in clause 3 of this standard. Strapping machines using strap not dealt with in this standard shall be designed following the prescriptions from EN 415-7 : Safety of packaging machines;Group and secondary packaging machines. Exclusions The following machines are not covered by this standard: Conveying systems that connect packaging machines with each other (they are covered by prEN 617, prEN 618, prEN 619, prEN 620 and prEN 741). Before using this standard, a hazard analysis and a risk assessment are to be carried out in order to establish whether the hazards of the machine to be designed are the same as those determined in this standard.


ICS-code 55.200
Nederlandse titel Veiligheid van verpakkingsmachines - Deel 6: Palletwikkelmachines
Engelse titel Packaging machines safety - Part 6: Pallet wrapping machines
Vervangen door
Normatieve verwijzingen
  • 98/37/EG, Machines



Ga naar winkelwagen