Norm

NEN-EN 50176:2009 en

Stationaire elektrostatische uitrusting voor het aanbrengen van ontvlambaar coatingmateriaal in vloeibare vorm - Veiligheidseisen

49,30

Over deze norm

Status Definitief
Aantal pagina's 15
Commissie Elektrisch materieel i.v.m. ontploffingsgevaar
Gepubliceerd op 01-10-2009
Taal Engels
This European Standard specifies the requirements for stationary electrostatic application equipment for ignitable liquid coating materials and for hard to ignite liquid coating materials to be used in explosive atmospheres generated by their own spray cloud. A distinction is made between spraying systems corresponding to EN 50050 and spraying systems designed for higher discharge energies and/or currents. This European Standard also specifies the design-related requirements for a safe operation of the stationary equipment including its electrical installation. 1.2 This European Standard considers four types of electrostatic spraying systems; see 5.1 for more details. 1.3 This European Standard deals with all hazards significant for the electrostatic spraying of coating materials, which could also contain small quantities of added metal particles, if the work is carried out under conditions recommended by the manufacturer. In particular, this includes ignition hazards resulting from the generated explosive atmosphere, and the protection of persons from electric shocks. 1.4 This stationary equipment is classified as equipment of group II, category 2G or category 3G for use in potentially explosive areas of zone 1 or 2, respectively.

Details

ICS-code 87.100
Nederlandse titel Stationaire elektrostatische uitrusting voor het aanbrengen van ontvlambaar coatingmateriaal in vloeibare vorm - Veiligheidseisen
Engelse titel Stationary electrostatic application equipment for ignitable liquid coating material - Safety requirements
Vervangt
Normatieve verwijzingen
  • 2014/34/EU,
  • 94/009/EEG, Ontploffingsgevaar en apparaten (ATEX)

Winkelwagen

Subtotaal:

Ga naar winkelwagen