Norm

NEN-EN 50177:2009 en

Stationaire elektrostatische uitrustingen voor het aanbrengen van ontvlambare coatingpoeders - Veiligheidseisen

Volledig inclusief:

61,30

Over deze norm

Status Definitief
Aantal pagina's 24
Commissie Elektrisch materieel i.v.m. ontploffingsgevaar
Gepubliceerd op 01-10-2009
Taal Engels
This European Standard specifies the requirements for stationary electrostatic application equipment for ignitable coating powders to be used in explosive atmospheres generated by their own spray cloud. A distinction is made between spraying systems corresponding to EN 50050:2001 and spraying systems designed for higher discharge energies and/or currents. The charging of ignitable coating powder can be achieved by applying high voltage or triboelectrically. This European Standard also specifies the design-related requirements for a safe operation of the stationary equipment including its electrical installation. This European Standard considers three types of electrostatic spraying systems; see 5.1 for more details. This European Standard deals with all hazards significant for the electrostatic spraying of coating materials, which could also contain small quantities of added metal particles, if the work is carried out under conditions recommended by the manufacturer. In particular, this includes ignition hazards resulting from the generated explosive atmosphere, and the protection of persons from electric shocks. This stationary equipment is classified as equipment of group II, category 2D or category 3D for use in potentially explosive areas of zone 21 or 22, respectively.

Details

ICS-code 87.100
Nederlandse titel Stationaire elektrostatische uitrustingen voor het aanbrengen van ontvlambare coatingpoeders - Veiligheidseisen
Engelse titel Stationary electrostatic application equipment for ignitable coating powders - Safety requirements
Vervangt
Gewijzigd door
Normatieve verwijzingen
  • 2014/34/EU,
  • 94/009/EEG, Ontploffingsgevaar en apparaten (ATEX)

Winkelwagen

Subtotaal:

Ga naar winkelwagen