NEN-EN 50250:1996 Ontw. en

Overgangscontactdozen voor industrieel gebruik

  • Deze norm is ingetrokken sinds 01-09-1998
  • Deze norm is niet direct leverbaar vanuit de NEN-shop.
    Wilt u dit product bestellen neemt u dan contact op met NEN-klantenservice: (015) 2 690 391 of

Over deze norm

Status Ingetrokken
Aantal pagina's 27
Commissie Elektrotechnisch installatiematerieel
Gepubliceerd op 01-06-1996
Taal Engels
Applies to conversion adapters, referred to below as adapters, intended mainly for industrial use, comprising a housing of insulating material which incorporates an industrial 2P + 16A, 6 h 250 V - type plug part (Table 104 in standard EN 60309-2) and one or two socket outlets in accordance with the relevant nationalstandards for socket outlets for household and similar use, with a rated current up to 16 A, intended mainly for industrial use either indoors or outdoors. This standard shall apply to all applications where the ambient temperature does not normally exceed 40 °C. The use of these conversion adapters on building sites, for agricultural, commercial and domestic applications is not precluded but care should be taken in considering protecting devices in use. Conversion adapters are for temporary use only. In locations where special conditions prevail, for example on board ship or where explosions are liable to occur, additional requirements may be necessary.


ICS-code 29.120.20
Nederlandse titel Overgangscontactdozen voor industrieel gebruik
Engelse titel Conversion adaptors for industrial use
Vervangen door
Normatieve verwijzingen
  • 73/23/EEG, Laagspanningsrichtlijn



Ga naar winkelwagen