Norm

NEN-EN 50377-18-1:2017 Ontw. en

Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 18-1: type 4+4x10.3125 Gb/s MPO (QFSP) transceiver mated with an MPO connector equipped with 12 fibre PPS ferrules terminated on EN 60793-2-10 category A1a.3a or A1a.3b 50/125 micron multimode fibre

29,20

Over deze norm

Status Ontwerp
Aantal pagina's 27
Commissie Fibre optic communications
Gepubliceerd op 01-03-2017
Taal Engels
This European Standard contains the initial, start of life dimensional, optical, mechanical and environmental  performance requirements (excluding electrical requirements) for a 12 fibre multimode PPS MPO plug terminated  on EN 60793-2-10 category A1a.3a or A1a.3b fibre and a 4+4x10,3125 Gb/s MPO (QFSP) transceiver to meet in  order to be categorized as an EN standard product.  Since different variants are permitted, product marking details are given in 4.6.

Details

ICS-code 33.180.20
Nederlandse titel Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 18-1: type 4+4x10.3125 Gb/s MPO (QFSP) transceiver mated with an MPO connector equipped with 12 fibre PPS ferrules terminated on EN 60793-2-10 category A1a.3a or A1a.3b 50/125 micron multimode fibre
Engelse titel Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 18-1: type 4+4x10.3125 Gb/s MPO (QFSP) transceiver mated with an MPO connector equipped with 12 fibre PPS ferrules terminated on EN 60793-2-10 category A1a.3a or A1a.3b 50/125 micron multimode fibre

Winkelwagen

Subtotaal:

Ga naar winkelwagen