Norm

NEN-EN 50389:2005 en

Space product assurance - Wire-wrapping of high-reliability electrical connections

  • Deze norm is ingetrokken sinds 30-12-2014

61,30

Over deze norm

Status Ingetrokken
Aantal pagina's 32
Commissie Lucht- en ruimtevaart
Gepubliceerd op 01-11-2005
Taal Engels
This standard specifies the methods for preparing and assembling the parts to be joined by wire wrapping, and the selection, calibration, use and certification of the wire wrapping tools. The required wire-wrapped connections are illustrated in Figure 1. This type of connection is similar to "Class A preferred" or "modified" connection detailed in MIL-STD-1130, and NASA NHB 5300.4(3H). Only tested and qualified wire-wrapped connections are covered by this standard, which lists four wire sizes from 24 AWG to 30 AWG, and three terminal post sizes up to 1,78 mm maximum diagonal. The use of thicker wire and larger terminals are not advised. Thicker wire than 24 AWG is generally multistranded and terminated by soldering (see ECSS-Q-70-08) or by crimping (see ECSS-Q-70-26). Training and certification requirements for operators and inspectors are defined in 9.7 and in EN 13291-1.

Details

ICS-code 49.060
Nederlandse titel Space product assurance - Wire-wrapping of high-reliability electrical connections
Engelse titel Space product assurance - Wire-wrapping of high-reliability electrical connections
Vervangt
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen